Product Description
This is a V-Belt. Manufactured by Toro. Round belts are a circular cross section belt designed to run in a pulley with a 60 degree V-groove. Round grooves are only suitable for idler pulleys that guide the belt, or when (soft) O-ring type belts are used. The V-groove transmits torque through a wedging action, thus increasing friction. A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of motion, to transmit power efficiently, or to track relative movement. Belts are looped over pulleys and may have a twist between the pulleys, and the shafts need not be parallel. In a two pulley system, the belt can either drive the pulleys normally in one direction (the same if on parallel shafts), or the belt may be crossed, so that the direction of the driven shaft is reversed (the opposite direction to the driver if on parallel shafts). As a source of motion, a conveyor belt is one application where the belt is adapted to carry a load continuously between two points.
If you need reassurance in verifying that this V-Belt will fit your mower please don’t hesitate to call or email us. Be sure to have your model and serial number available.
Specifications:
- Length: 38 Inches
- Width: 3/8 Inch
- Kevlar® cord
- Oil and heat resistant
| This part is used in 3 Toro model(s). | ||
| ||
| ||
|
Other Details
- This is a single product
- Manufactured by Toro
- Length: 38 Inches
- Width: 3/8 Inch
- Kevlar® cord
- Oil and heat resistant
- Black in color
